Popularized by the iconic stoner sitcompineapple express, the crossed joint is a “push-up” that many cannabis users have tried –and failed– in smoking sessions. When you're ready to stop laughing and get serious, read these instructions on how to roll a cross joint. While you're at it, learn what a cross joint is and find outhow to rollequally dark or moody smokable cannabis.
What is a cross joint?
A cross joint is a full-size joint with a smaller joint strung through the middle. To smoke a cross joint, you light all three points simultaneously and inhale. Supposedly, cross joints fill your lungs more completely with marijuana smoke, resulting in greater euphoria.
In reality, however, cross joints are often difficult to ride and disappointing in practice. You'll find this is just because you've been winding them the wrong way as you continue through this guide.
What materials do you need to wrap a transverse joint?
What do you need to start rolling your own crossed joint at home? Let's start by listing the materials and tools that will be part of this cannabis masterpiece.
- a rolling machine
- a grinder
- King Size Role Plays
- Full size plain papers
- A crutch
- Approximately 3.5g of herb
- A clean, flat surface
- A screwdriver or other tool to make holes.
How do you roll a cross joint?
Now that you've gathered all the materials you need to roll a cross joint, it's time to put it all into action with the following steps:
1. Enroll the main board
Start by rolling a large joint with king size paper. This joint should contain most of theeighth of marijuanayou've ground it up, but it shouldn't burst at the seams with cannabis either. You'll need your join to be a bit loose, at least at the end, to allow room for the "cross" bars.
We suggest using a laminating machine to ensure consistent results and avoid waste. Be sure to choose a king size rolling machine to accommodate the two sizes of rolling papers you will be using. Place the crutch at one end of the joint before sealing and rolling it.
2. Haz a leek up
Once the main joint is ready, use the rest of the herb to roll another joint using full size paper. Do your best to make this joint long and skinny. Twist both ends to close.
3. Drill a hole in the main joint
Here comes the tricky part: drilling a hole for the thin gasket to go through. If the implement you use is not sharp enough, it can tear the paper. However, if it is not wide enough, it will be difficult to push the second joint.
Generally, the type of small screwdriver you use when working with electronics is best for this type of task. if you have a realawl, this can work too, but avoid the temptation to use a pen or pencil. Both writing instruments are too thick and will mar your crosshead.
4. Drill a hole in the thin gasket for airflow
You will also need to drill a small hole in the thin gasket to provide adequate airflow. A sewing needle or thumbtack will suffice for this step. Drill the joint near its center.
5. Insert the thin gasket into the main gasket
After piercing the hole with a needle or similar instrument to remove the ground cannabis material, carefully insert the thin joint into the two holes you made on each side of the large joint. This is the critical step in the process: any failure to pay due attention to this point could ruin any of the joins you are trying to merge.
6. Seal connection points
Once the thin gasket is inside the thick gasket, seal the connection points with saliva after making sure the hole in the thin gasket faces the same direction air will flow when you blow into the gasket. After allowing the connection stamps to dry, your cross joint will be ready to smoke.
What is the purpose of a cross joint?
Supposedly, the cross junctions allow for better airflow during inhalation, resulting in greater volumes of smoke filling the lungs. It's unclear exactly how accurate this engineering dream turns out to be in practice, but one thing that can't be denied about the crossover joint is that it's great.
If you're a seasoned smoker who's rolled more joints than you can count, the crossover joint is simply a new challenge to try. Whether or not you try mystic boosters for your high, you know you've achieved something that many cannabis aficionados never manage to achieve.
Does a cross joint make you taller?
If you cross-roll the right way, you'll likely inhale more smoke per puff than you would with a regular joint. It is less certain, however, that this increase in smoke volume will noticeably increase your euphoria.
Who shot the first cross joint?
Many sites indicate that Seth Rogen, the lead actor in the 2008 stoner comedypineapple express, is the inventor of the transverse joint. However, according to Rogen himself, this is not the case. In a recent interview withCON CABLE, Seth Rogen states the obvious and admits that he did not invent the crossover joint.
Many people of Rogen's generation and since have seen crossdressers together at parties, in many cases before the release ofpineapple express🇧🇷 No one knows for sure when the first crossover joint was made, but it was certainly before Rogen's production team sat down with a bunch of joints they remembered being popular in high school when they created props for the movie.
Did Seth Rogen create the crossover?
No, Seth Rogen himself admits that he is not the inventor of the cross joint, and many people remember smoking cross joints long before the release ofpineapple expressin 2008. The name of any inventive cannabis entrepreneur who actually invented the crossed joint will probably never go down in the annals of history. As the person who popularized the cross joint the most, Seth Rogen can also be remembered as the inventor of this unique smokable marijuana at this time.
in which they smokedpineapple express?
A better question would be: “Didn't they smoke in thepineapple express🇧🇷 The crossed joint was certainly not the only type of joint smoked in this memorable marijuana comedy. Also worth noting is the bong gas mask that he dons at various points in the film, and it's a guarantee that you'd be completely on fire if you took a hit every time you saw a different type of cannabis product throughout the film.pineapple express.
Is a crucifix the same as a cross?
Yes, the cross joint is also sometimes called a "crucifix." Although, if you get really weird with the definition of something you use to smoke weed, the ultra-quiet stoners sitting around you might start accusing you of giving off a "stinky vibe." Call it a cross, crucifix, or whatever you like: just make sure you roll this dainty joint correctly or you risk committing a party foul.
How is a crucifix wound?
Since we are talking about the same thing here, you make a cross in exactly the same way that you make a crossed joint. Take a large gasket, drill a hole about a third of the way in from the tip, and insert a thinner gasket that has been similarly drilled for airflow. Scroll up for detailed instructions on how to roll a cross joint.
What is a braided joint?
Atwisted jointIt is exactly what it sounds like: a joint that has been braided with another joint in the same way that you braid your hair. To roll a braided joint, you will need three long, thin rolled joints with enough slack to make them flexible. Then simply cross the seams over each other to form a braided weave. Detailed instructions below.
How do you braid a joint?
How, exactly, do you roll a braided joint? These are the steps you will need to follow:
- Roll 3 thin, relatively loose fillingstogether
- Remove the glue strip from a separate rolling paper
- Connect the bottoms of all three using the glue strip.
- Then alternately crisscross the seams together to produce a woven look.
- Twist the ends of the knuckles together at the end
How do you roll a triple barrel joint?
A triple knuckle is similar to a braided knuckle, but is easier for beginners to roll. It consists of three joints held together with a hemp wrap. As you end up smoking morehemp paperthat way, the triple tubes don't need to be braided.
To roll a triple barrel joint, simply divide three equal amounts of cannabis into three hemp paper joints. Attach crutches to the ends of each joint before rolling. Then place all three together side by side in a hemp or tea wrap and roll them into one giant knuckle.